SEMIA monthly 2

[OaKeY]

I don't know sometimes that can burn people. It kind of hurts to get sprayed by it.

[AndrewMp5k2007]

As long as we don't use draino bombs or something of the sort, I am cool with it.

[El Phantasamo]

As far as I know, Vinegar and Baking soda are inert and harmless.

So until a chemical engineer says otherwise, they are OK

[Dutton]

If nobody has tried it by the time I get my other spring for my SR25, I'll do a few test from 25, 50, 75, and 100 feet with it on the balloons (no bag), and balloons with the bag, and see what damage it does.

*Note*
My gun will be a little over 500 FPS with the new spring, I doubt many, if any, at the games will be carrying a gun much hotter than that.

[Knief]

You know that your gun will have to be semi auto only to use that spring at our games, right? That is, it can't be switched to full auto without disassembling it and altering something on the selector plate/trigger electronics.

[Dutton]

Yes, I'm well aware. It has a cut-off switch inside the mech box. You can switch the selector switch to full auto, but it only shoots Semi.

[Mr Embed]

Damn Dutton I hope I'm on your team...owie.

[GeneralB]

echo said:

I don't know sometimes that can burn people. It kind of hurts to get sprayed by it.

I dont think that it would hurt I have gotton 6 molar Hydrochloric acid on me in chem and it doesnt hurt much I was ichy all day but thats about it.

Maybe I will screw around with Bakeing Soda and vinegar and see what I can come up with

[piratevalkyrie]

Me and a friend of mine made an airsoft mortar round, it a legnth of PVC pipe with a PVC pipe air tank. We've manufacture some "shotgun shells" for it. It works by putting the shotgun shell into the PVC pipe (muzzle loader) and pouring some BB's in, then close the valve and pump it about 40 times with a high pressure bike pump (meaning per pump it has a low output, but can pump into a very high PSI container) We then test fired it and the mortar went 70 yards INTO THE WIND. We're testing some spring loaded rocket rounds for the house, using the spring/cork grenade concept in the general forums under the "airsoft grenade v2" topic.

[Mr Embed]

piratevalkyrie said:

Me and a friend of mine made an airsoft mortar round, it a legnth of PVC pipe with a PVC pipe air tank. We've manufacture some "shotgun shells" for it. It works by putting the shotgun shell into the PVC pipe (muzzle loader) and pouring some BB's in, then close the valve and pump it about 40 times with a high pressure bike pump (meaning per pump it has a low output, but can pump into a very high PSI container) We then test fired it and the mortar went 70 yards INTO THE WIND. We're testing some spring loaded rocket rounds for the house, using the spring/cork grenade concept in the general forums under the "airsoft grenade v2" topic.

You've inspired me to try and make a mortar now haahah, now I have something to do! w00t!

I'm going to try a pvc pipe (which is cool cause it's already painted olive drab cause I like to think it's a rocket launcher..)

And i'm going try using a bike pump as well, if not I might use the internals to an automatic Nerf gun I have.

[bman111]

use citric acid and baking soda as the dry powder and then add water

vinigar just doesnt give enough uumph

[El Phantasamo]

bman111 said:

use citric acid and baking soda as the dry powder and then add water

vinigar just doesnt give enough uumph

+1 Karma for you

[Mr Embed]

bman111 said:

use citric acid and baking soda as the dry powder and then add water

vinigar just doesnt give enough uumph

Yeah I found that out a couple years ago when I used to make chem rockets.

[GeneralB]

I could steal some good chemicals form my school chem lab that will really give it a boost

[AndrewMp5k2007]

......I don't even know how to respond to that.....