will
New Member
Posts: 42
|
Post by will on Jun 24, 2009 10:26:10 GMT -5
Hey, i have an agm tsd M-14 do you know any upgrades that will give it a tighter pattern and longer range. I just put a scope on it to figure out how inaccurate it is. not only that but after 30-50 yd (approx) the spread is so great it is impossible to hit anything.
It would be a great gun for indoors, but its a full size gun and wights about 15lbs :/
|
|
|
|
Post by specialopsguy on Jul 1, 2009 0:45:26 GMT -5
naa dont know any but if you ever return it i would get the CYMA M14
|
|
odysseus
New Member
Master bowman.
Posts: 49
|
Post by odysseus on Jul 1, 2009 20:11:51 GMT -5
*WAIT* Do you have the AEG m-14 by AGM? Or do you have the springer from TSD? A good upgrade is the ECHO-1 m14, or the CYMA. I have mixed feelings about CYMA. Other than that, you are not gonna find much if your rifle is a springer.
|
|
will
New Member
Posts: 42
|
Post by will on Jul 2, 2009 22:03:01 GMT -5
well, its code is the mp008 anyway its broken, if you want pics I'll post them but i removed the barrel but something went wrong and when it loads the bb's into the firing chamber they don't come out, i think its because of the rubber seal but i cant remove it :/ I'm really sad because I was really looking forward to playing air soft but i cant now because 1. no job 2. Michigan was hit hard by gm and chrysler going bankrupt and 3. my parents don't buy things for me, it has to be my own money.
|
|
will
New Member
Posts: 42
|
Post by will on Jul 2, 2009 22:03:41 GMT -5
|
|
odysseus
New Member
Master bowman.
Posts: 49
|
Post by odysseus on Jul 3, 2009 12:47:57 GMT -5
Alright, so it is the AEG. Hmm. To compensate for the BB spread, i suggest getting a tight bore. To get more reliable, accurate and constant shots, i would recommend new Hop-Up bucking. You will have to do more research for the barrel sizes and Bucking, because i do not know giggly squat about M-14's. Buy a new Hop-Up chamber or new bucking if you can get to it. They are fairly inexpensive. Or, you can build a lemonade stand and raise money for a new replica.  |
|
odysseus
New Member
Master bowman.
Posts: 49
|
Post by odysseus on Jul 3, 2009 12:49:51 GMT -5
Actually, it would be nice if you had pictures. Then we could scope out what the real problem is. Post some pictures if you feel it is necessary. ;D
|
|
will
New Member
Posts: 42
|
Post by will on Jul 3, 2009 19:57:24 GMT -5
I will post images when i figure out how, and i think i fixed everything, it shoots but i wont know how well until my battery recharges
|
|
will
New Member
Posts: 42
|
Post by will on Jul 4, 2009 16:40:44 GMT -5
the barrle isnt fitting in right :/
|
|
odysseus
New Member
Master bowman.
Posts: 49
|
Post by odysseus on Jul 5, 2009 20:49:42 GMT -5
Well, it may be time for the thing that we all dread... Opening the gun for the first time.  It appears your bucking got loose, and folded up and got mangled in the hop-up chamber, or the tappet plate snapped so the air nozzle will not move forward. There is a thousand different things that could go wrong. I do not quite understand what it is you are trying to tell us what is wrong, though. I reccomend posting some pictures, PMimg a moderater about your situation, or post your problem on the MIA Tech section. You could get some more responses and possibly a solution. Sorry i couldn't be of any further assistance. |
|
will
New Member
Posts: 42
|
Post by will on Jul 6, 2009 18:21:16 GMT -5
OK it kinda fits in, there's a pin that goes in a hole XD anyways i have to solder a terminal and retrieve the fuse-to-battery link its deep within the stock tso im going to have to move the wire arround till I can get it out. :/
|
|
odysseus
New Member
Master bowman.
Posts: 49
|
Post by odysseus on Jul 6, 2009 20:07:06 GMT -5
Lol. It seems you are putting a little two much effort in your repair. I would slow things down a bit and make a good decision, and not rash ones's. 1. Decide if you would like to invest in an AEG: Volunteer for some work around your area, sell some crap, or trade for a new AEG (Birthdays and holidays are also exceptions.)
2. Instead of trying to fix a part you may not know will work (no pun intended), try saving up for a new part (redundant to option 1.), and start from there. TRUST ME I've been through a problem near identical to yours, and i ended up stripping the wiring, and snapping the tappet plate along with the original problem i was trying to fix (don't worry, everything is fixed now =) ).
3. If you are going to go through with your DIY fix-it-up, then go SLOW, and do a good job. Make sure you are putting in effort. REMEMBER-Every little nook in cranny in an AEG are holistic; one thing depends and affects another. Make sure you do your research on what to do, and purchase quality parts and pieces if necessary.
Phew...Good Luck!
|
|
odysseus
New Member
Master bowman.
Posts: 49
|
Post by odysseus on Jul 7, 2009 17:19:54 GMT -5
Hey, were you at No Limits on June 20th? I could have sworn i saw a kid with an m-14 with a little tape on it. Was that you? Lol. I just ordered a new replica ;D. Can't wait! Evike=awsome.
|
|
will
New Member
Posts: 42
|
Post by will on Jul 8, 2009 13:37:36 GMT -5
Ah, no. i've only been in a few small scrimishes with my friends but once I fix this gun then I'll start playing. but theres onle one problem. you know that terminal, well when i put the trigger guard in the gun doesnt shoot because the terminal comes unplugged:/ but when i take it out it snaps back into place XD so idk :? just that last problem then im set to go  |
|
will
New Member
Posts: 42
|
Post by will on Jul 8, 2009 13:39:45 GMT -5
EDIT: YESSS I fixed it now I have to shoot some rounds and hope I didnt break the hopup!! (knocks on wood)
Dubble edit: :/ now it spits out the bb's slower than my $5 spring pistol shooting .30g bbs
|
|
It appears your bucking got loose, and folded up and got mangled in the hop-up chamber, or the tappet plate snapped so the air nozzle will not move forward. There is a thousand different things that could go wrong. I do not quite understand what it is you are trying to tell us what is wrong, though. I reccomend posting some pictures, PMimg a moderater about your situation, or post your problem on the MIA Tech section. You could get some more responses and possibly a solution. Sorry i couldn't be of any further assistance.