dboyakuser1
New Member
I can't use proper Grammar
Posts: 14
|
Post by dboyakuser1 on Aug 26, 2009 23:33:19 GMT -5
I came across this gun yesterday and it looks pretty good. I was wondering if anyone had it, and, or nows someone that has it. Just so I can get a second opinion.
Please reply. Negative or positive.
Thank you
|
|
|
Post by airsoftmarine7 on Aug 30, 2009 15:31:13 GMT -5
If you plan on using it at events in Michigan... no, don't get it. It shoots at 430 fps so since it has full auto, that'd be 10 fps to high to use. There is also the fact, echo 1's and other clone guns don't have good accuracy so you'd have to buy a new barrel and hopup unit which would probably increase the FPS even higher. Also, considering clone guns arn't meant to last, and the fact you'd be spending almost $300 not counting a new barrel and hop up unit (if you want better accuracy), you'd be better off with a tokyo mauri. A g&g if you don't wana mod it for higher fps.
|
|
|
Post by Ghast on Aug 31, 2009 0:03:24 GMT -5
Airsoftmarine7, before you start spewing information that ranges from biased to flat out untrue try doing a little research. The SR-25 is a DMR style weapon, this means semi auto is far more likely to be present it the weapons. The ER-25k shoots 430 fps which is right in the ballpark of DM style weapons, as far as FPS is concerned. While yes, it's not the best buy, it's by no means the worst.
With regards to your TM and G&G comments, the G&G is easily the best gun out there. TM is a fantastic company which we use to judge all other companies by, a gold standard if you will. In the hierarchy of these three it would go G&G > TM > Echo-1. Onto my point, G&G would easily be the best weapon to start upgrading to high fps because all of it's components are reinforced already as well as the fact that they come stock with a tightbore. TM's reliability comes from the fact that you're supposed to keep them stock.
To summarize my post, the ER-25k is an alright buy, I've heard more good things about it than bad. And as a first weapon would be affordable and semi-unique. Also, why would he not be able to use it in MI? Not full auto maybe but a permanent semi-auto mod takes five minutes to carve out the notch in the selector plate. Making it legal to use by MIA standards.
|
|
|
Post by airsoftmarine7 on Sept 1, 2009 22:19:23 GMT -5
Airsoftmarine7, before you start spewing information that ranges from biased to flat out untrue try doing a little research Didn't think of the modding part to remove full auto. But whats the biased part?
|
|
will
New Member
Posts: 42
|
Post by will on Sept 2, 2009 8:55:52 GMT -5
"There is also the fact, echo 1's and other clone guns don't have good accuracy so you'd have to buy a new barrel and hopup unit which would probably increase the FPS even higher"
Well, I've gone through alot of reviews that say some clone guns are better, and I dont have any problems with the ones I've bought. Biased means it has too much of one side's input into it EG. you, but I dont wanna go English teacher on you because during the summer my typing goes to sludge.
|
|
|
Post by airsoftmarine7 on Sept 2, 2009 11:39:14 GMT -5
Well, I take that from my gun I have now. Mine is about 2 years old and I did hear the stuff how they are getting better, but at the same time I hear its still not as good as quality guns. If you wana spend under $200 on a gun then yah, go with a echo1 but nearly $300 seems like a waste.
|
|
will
New Member
Posts: 42
|
Post by will on Sept 2, 2009 21:12:51 GMT -5
I just dont want to buy expensive TM guns when "I buy quality china gun at fraction of cost but still good ?? un heerd of!" lol when evike doesn't grammar check their listings xD
|
|