|
|
Post by airsoftmarine7 on Sept 4, 2009 22:42:08 GMT -5
I just ordered a G&G M16 A3 from ASGI for my birthday. Before ordering I sent an email to ASGI asking what the FPS was (site said 330-350 but reviews put it as high as 410) and was responded to at 350-360. Once the spring sets will it stay under 350 (I wana also use it for CQB) and about how many rounds will it take for it to set (approximately).
|
|
|
|
Post by Knief on Sept 5, 2009 9:24:36 GMT -5
It's hard to say where the spring will settle. Gestapo and I both had G&G GR 16 carbines that shot about the same when we got them, about 365 FPS. His settled down to about 320 FPS. Mine stayed at about 360 FPS. It's just a crap shoot on where your spring will end up. It should start to settle after two or three full game days, but again, that's just a rough number. It could take months, or it could happen pretty rapidly. If, after a month or two, you're still shooting over 350 FPS, pick up a PDI 140%, or if you want to be safe, 130% spring and drop it in. That should put you just below 350 FPS from the get go (or 330, if you use the 130%), and it won't settle much.
|
|
|
|
Post by airsoftmarine7 on Sept 5, 2009 19:02:22 GMT -5
Ok thanks.
|
|
