OaKeY
Full Member
Livonia's Apprentice
Breath, One, Two, Pulse, Pull...
Posts: 703
|
Post by OaKeY on Jul 20, 2006 21:18:45 GMT -5
Sorry to bump a month old thread, but I was wondering if the engraving is still going on? I just got a couple things I want done.
I will PM Lutris with the details.
|
|
|
|
Post by Gestapo on Jul 20, 2006 23:31:37 GMT -5
Ya, he is still doin it. I can talk to you for him.
|
|
OaKeY
Full Member
Livonia's Apprentice
Breath, One, Two, Pulse, Pull...
Posts: 703
|
Post by OaKeY on Jul 21, 2006 13:08:25 GMT -5
Alright thanks.
|
|
|
|
Post by Psychosis on May 20, 2007 23:48:14 GMT -5
Does this still happen? For future reference, if I ever get a gun and/or metal body that need engraving.
|
|
|
|
Post by Gestapo on May 21, 2007 0:05:44 GMT -5
Yup, still going on.
|
|
|
|
Post by Psychosis on May 21, 2007 0:11:01 GMT -5
Well then, I'm going to sticky this for future reference - if anyone else needs engraving, just talk to Lutris!
|
|
|
|
Post by Gestapo on May 21, 2007 0:31:41 GMT -5
Actually, send PMs or questions my way. He rarely comes on these forums, if ever anymore. I talk to him pretty much daily.
|
|
|
|
Post by AndrewMp5k2007 on May 21, 2007 7:40:47 GMT -5
Well then Gestapo, looks like a PM may be coming your way as I may just have a big order for him to fill.  |
|
|
|
Post by Gestapo on May 21, 2007 11:05:15 GMT -5
Right now, the laser is going through HEAVY use. A school needs about 4000 pieces of paper with 850 little holes cut it them on each piece of paper. Why? I'm not sure, but if you want to send me what you need done, and any designs, I can get you an estimate.
|
|
|
|
Post by Father_Livonia on May 21, 2007 15:40:27 GMT -5
need to get my 96 done too
|
|
a2nm00gle
Junior Member
I'm a ninja... that cant climb walls, or catch arrows
Posts: 140
|
Post by a2nm00gle on May 21, 2007 19:01:28 GMT -5
you guys only do metal bodies right, or plastic too?
|
|
|
|
Post by Mirage on May 21, 2007 22:08:57 GMT -5
i also might have an order for him to fulfill.
what would be the ballpark for writing on a pistol slide?
|
|
|
|
Post by Gestapo on May 21, 2007 23:25:13 GMT -5
5-15 dollars probably. It has to be anodized, painted, or plastic for the laser to work. If you want to come down to the shop, we can probably show you what your design will look like on a scrap piece of wood. Again, this will not work on bare metal, it needs a coating of some kind.
|
|
|
|
Post by kjones734 on May 22, 2007 1:53:21 GMT -5
|
|
|
|
Post by Gestapo on May 22, 2007 12:39:09 GMT -5
Possibly, but you would have to remove all the none white stuff around the outside of him, or else it would show up. I'm probably going to his shop later today, I'll throw the pic on a disk and see how it turns out on a piece of wood.
|
|
